Jasic JM-452S 450A Separate MIG Welder – 400V, Air-Cooled
Earn 2,852 points with this purchase
£2,852.50£3,423.00 Exc VATInc VAT
Complete your machine in three quick steps
Choose your free plug and SGL-picked safety package. Unlock up to 20% off selected categories.
Machine guide
- Processes
- MIG/MAG / MMA/ARC
- Power supply
- 400/415V three-phase
- Duty cycle
- MIG: 400A @ 100%; MMA: 400A @ 80% (40°C)
- Suitable metals
- mild/carbon steel, stainless steel, cast iron or dissimilar steels with the correct electrode
- Single-pass
- MIG: about 1.2–25 mm; MMA: about 3–15 mm
- Multi-pass
- MIG: 40–50+ mm with joint preparation; MMA: 30+ mm with joint preparation
Practical selection guide, not a guaranteed manufacturer limit. Capacity changes with process, metal, joint design, preparation, consumables, position, duty cycle and operator technique; figures assume maximum rated output on the appropriate supply.
Jasic JM-452S 450A Separate MIG Welder – 400V, Air-Cooled
The Jasic JM-452S 450A Separate MIG Welder – 400V, Air-Cooled is a 450A mig/mag / mma/arc machine for workshop, fabrication, maintenance or site work. The summary below makes its processes, electrical supply and practical material capacity easy to compare.
Machine capability at a glance
| Processes | MIG/MAG / MMA/ARC |
|---|---|
| Power supply | 400/415V three-phase |
| Suitable metals | mild/carbon steel, stainless steel, cast iron or dissimilar steels with the correct electrode |
| Typical single-pass guide | MIG: about 1.2–25 mm; MMA: about 3–15 mm |
| Typical multi-pass guide | MIG: 40–50+ mm with joint preparation; MMA: 30+ mm with joint preparation |
Practical selection guide, not a guaranteed manufacturer limit. Capacity changes with process, metal, joint design, preparation, consumables, position, duty cycle and operator technique; figures assume maximum rated output on the appropriate supply.
Full product details
Jasic Multi Process MIG Welding Machine – 450 amps JM-452S Pictured is the air cooled version which you can see includes the benefit of a storage draw where the water cooler would be if you had one. This 450 amp machine is the bigger brother of the 350 version and comes with all the same benefits but is suited to the heavier industry. Subtle changes internally like the wire feed motor being upgraded are not so noticeable but the most critical difference is the duty cycle being 100% at 400 amps! If you are looking for a beast of a machine then you might have just found the right machine for your business. What is more, you will be covered by a 5 year warranty with any Jasic machine bought through Sultani Gas. To make it really simple, we register the warranty for you all you have to do is carry on making money and if your machine was to fail there is a small fleet of Jasic field engineers who will come to you to get you back up and running. Key Features Burn back control Wire feed button Advanced control circuitry (less spatter, more stable arc and better weld appearance) 4 roll feed unit Variable inductance Gas test function Water cooler Technical Spec Input Voltage 400 V AC (3 Ph) 50/60 Hz Recommended Input Fuse 45 A Current Range 60 – 450 A Voltage Range in MIG 15 – 40 V No-Load Voltage 72 V Wire Speed (m/min) 1-18 Duty Cycle @ 40°C 400 A @ 100% MIG (80% MMA) Wire Spool Size 300mm Dia. (15kg Spools) MMA Current Range 30 – 400 A Power Factor 0.91 Protection / Insulation Class IP21S Recommended Generator Size 20 kVA (should be AVR) Dimensions 760 x 365 x 585 mm Weight 53kg Source and Feeder only
Reviews
There are no reviews yet.